Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 81 / 240

81/240
13.2.2 Navigation level:
This level is used to create a Comfort Panel navigation
structure. The working area shows the four sections of the
navigation bar of the selected Comfort Panel (plus another
section which only includes the start page). Typical tasks
on this level include:

Adding and designating pages and containers

Changing page and container symbols
13.2.3 Page level:
This level is used to configure Comfort Panel start,
operating and application pages. The working area
shows the selected start, operating or application
pages. Typical tasks on this level include:

Adapting the layout of operating pages

Adding and designating control elements on
operating pages

Changing control element labels on operating
pages

Setting application parameters on application
pages

Linking control element communication ob-
jects to group addresses

Linking application page communication ob-
jects to group addresses
13.3
→
Navigation in IP-Project
13.3.1 Navigate between levels
The configuration of a Comfort Panel in IP-Project stret-
ches over three levels:
Project level
,
navigation level
and
page level
(see above "Levels in IP Project"). You can
switch between these three levels at any time. The path at
the top of the working area indicates where you are at the
moment.
If you wish to go to
a deeper level
(e.g. from project to
navigation level), you have the following options: