Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 154 / 240

154/240
20.3.6 IP output module details
20.3.6.1 Behaviour
Upon receipt of a value via the logic-sided input
data in
, the IP output module sends TCP- or
UDP-based data with the incoming value to a specific IP address using a specific port.
The sent data corresponds to the selected KNX-compliant data type of the IP output module.
20.3.6.2 Extended settings

Via the
Only send with change
parameter, you can specify whether a date shall
only be sent if a logic-sided received value is different to the previously received
value.

Via the
Protocol
parameter, you can specify whether TCP- or UDP- based data
shall be sent.

Via the
Port
parameter, you can specify on which port data shall be sent.

Via the
IP address
parameter, you can specify on which IP address port data
shall be sent (e.g. "192.168.1.113").

Via the
Terminate connection after sending a date
parameter, you can specify
whether the connection shall remain open after the sending of data (in the case
of a TCP-based communication).
In this case, via the
Limit bytes
parameter, you can specify characters in hexa-
decimal notation (e.g. 0x01) that are added to every data packet sent.

Using the
Preamble
and
Postambel
parameters, you can specify characters that
are to be inserted to the data to be sent:
o
For UDP at the beginning and end of every UDP data package.
o
For TCP at the beginning and end of the complete transmission.

Via the
KNX data type
or
Value format
parameter, you can specify to which
KNX-compliant data type the data received on the logic-sided
data in
shall be
converted to before it is sent per IP.