Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 132 / 240

132/240
listed in which you can activate each level individually via
the checkbox. Stage 0 (guest) is permanently activated.
For user levels that are activated the PIN, which is 0000 as
standard, should be changed.
19.9.14.2 Assigning pages and
operating elements to the user
levels
With the user levels so defined, you can then configure the
access control for single pages and operating elements.
Then select the entry
Assignments
in the left window sec-
tion of the editor. In this view all pages and operating ele-
ments are listed that have been created up to now in the
Comfort panel. Also displayed is the user level assigned to
each element. Standard is level 0, which does not require a
PIN. You now have the opportunity to edit the assignment
of the access levels.
In view
Default settings
and via the checkbox
Activate
blips
you can set whether a blip is to be played. This signal
sounds as soon as access is denied by the access control.
19.9.14.3 Time interval for a return to
user level 0
You can define a time interval for a return to user level 0.
The authorization status of a user on the Comfort Panel is
limited timewise. After a correct entry of a PIN an internal
timer starts. When the timer has run down, the user's cur-
rent authorization level is withdrawn and he is again log-
ged in as guest. The timer starts anew each time the user
makes an entry on the screen. The length of the time inter-
val can be configured in view
Default settings
via
Automa-
tic block
.
19.9.15 Using logic functions
Please look here .