Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 128 / 240

128/240
You can get this from your network administrator.
This parameter can only be set if the proxy mode was set
to
Manual proxy settings
.
19.9.10.4 HTTP proxy port
The required port is specified via the
HTTP proxy port
pa-
rameter. In many cases, this is preset to port "8080". You
can get the information about the required port from your
network administrator.
This parameter can only be set if the proxy mode was set
to
Manual proxy settings
.
19.9.10.5 HTTP proxy exceptions
You can create an exception list that is used by some Inter-
net servers that do not support proxy server functions via
the
No HTTP proxy for
parameter.
This parameter can only be set if the proxy mode was set to
Manual proxy settings
.
Supported delimiters are semicolon, comma and „|“.
Furthermore, you can use "*" as placeholder. Any blanks
within the list are ignored.
Example:
205.105.148.*;www.msn.*,212.145.33.22|www.google.com
19.9.11 Using the simulated presence
Simulated presence can be used to record processes in the
house (e.g. switching of lights, adjusting blinds) while the
user is present (recording mode) and then carry them out
(playback mode) during the user's absence.
Recording mode:
The simulated presence records the telegrams of 20 objects
over the period of one week and stores these with week-
day, time, object number and value (1 bit/1 byte). If more
than one telegram arrives per object and minute, only the
last telegram is tested and stored. Only the change of state
is recorded, i.e. with telegrams of the same content only
the first one is recorded.
Up to 20 actions per day and object are recorded. If there
are more telegrams within a 24-hour period, the oldest
telegram is deleted from the memory. The simulated pre-
sence operates with one memory per object for the current
day and the respective weekdays.