manualshive.com logo in svg

Busch-Jaeger Busch-ComfortTouch, Product Manual

Share
Download
Busch-Jaeger Busch-ComfortTouch Product Manual Download Page 24

24/240 

Periods of validity can be allocated to weekly programs (e.g. school holidays), outside 
of which they are deactivated. In this way, weekly programs can be automatically acti-
vated and deactivated. A maximum of 8 periods of validity can be defined. 

 

 

Via the integrated Astro-function e.g. blinds can be moved every day a few minutes 
earlier or later, according to the actual season. A lock fuction “not before” and “not af-
ter” allows an adaption of the settings to the Astro-function. 

 

 

 

 

 

4.8 Presence 

simulation 

The simulated presence of the building occupant can be realistically simulated to a 
great extent when the occupant is not present. This increases the protection against 
unauthorised access. 

Summary of Contents for Busch-ComfortTouch

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands