Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 223 / 240

223/240
20.3.41 Staircase lighting details
20.3.41.1 Behaviour
If this module receives the value 1 (logical "true") via the
Input 0
, it immediately outputs it on
the
Output 0
. After expiry of a delay time, the value 0 (logical "false") is output on the
Output 0
.
The delay time (in seconds) is dependent on the value at
Input 1
.
Via a value at
Input 2
, a number of pulses can be defined that are output before expiry of the
delay time on the
Output 0
. A pulse consists of a 0-1 combination with an interval of 0.5 se-
conds between the values 0 an 1.
If invalid values are specified for the delay time or number of pulses (e.g. -1), the result 1 (logi-
cal "true") is output on the
Output 1
.
The data type of the
Input 0
is Boolean, the data types of the
Inputs 1
and
2
are Number. If ne-
cessary, incoming values are converted before the calculation (see conversion table below).
20.3.41.2 Extended settings
Via the
Restart timer
parameter, you can specify whether the delay time shall always be reset by
the receipt of the value 1 via the
Input 0
.
20.3.41.3 Conversion table
Boolean
(converted) Number
(converted)
Boolean ---
true
false
→
→
1
0
Number
0
≠ 0
→
→
true
false
---
DPTTime true
Milliseconds
since 1.1.1970
DPTDate true Number
String "0" or ""
→
→
false Number, if possible;