Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 221 / 240

221/240
20.3.40 On/Off delayer details
20.3.40.1 Behaviour
The module is a special case of the delayer for binary input values. If a value is received via the
Input 0
, this value is output on the
Output 0
after a delay time. The delay time (in seconds) is
dependent on the binary input value:

If the value 1 (logical "true") is received via the
Input 0
, the delay time is defi-
ned via the value at
Input 1
.

If the value 0 (logical "false") is received via the Input 0 , the delay time is defi-
ned via the value at
Input 2
.
If invalid delay times are specified (e.g. -1), the result 1 (logical "true") is output on the
Output
1
.
The data type of the
Input 0
is Boolean, the data types of the
Inputs 1
and
2
are Number. If ne-
cessary, incoming values are converted before the calculation (see conversion table below).
20.3.40.2 Extended settings
This module has no additional setting options.
20.3.40.3 Conversion table
Boolean
(converted) Number
(converted)
Boolean ---
true
false
→
→
1
0
Number
0
≠ 0
→
→
true
false
---
DPTTime true
Milliseconds
since 1.1.1970
DPTDate true Number
String "0" or ""
→
false Number, if possible;