Busch-Jaeger Busch-ComfortTouch, Product Manual

Page: 144 / 240

144/240
are played back without time intervals.
20.2
→
Configuring access control
20.2.1 Using the access control
Certain areas of the Comfort Panel can be equipped with
access protection. This is displayed on the Comfort Panel
by means of a small lock icon next to the respective head-
line of the page or the operating element. When actuating
the button the user must first enter a four-digit code to
trigger the function.
Different user levels can be created for the access control
with the editor and the relevant four-digit security number
(PIN) can be set. You can also assign a user level to indi-
vidual pages and control elements in the Comfort panel.
The pages and control elements can then only be operated
with the respective user level.
Note:
As alternative to the central assignment of access rights to
the individual pages and functions (via the editor for ac-
cess control) you can also make these settings directly on
the elements. If, for example, you wish to assign access
protection to an operating element, you can do this by
means of parameter
User level
in the settings dialogue
Ex-
tended settings
in the parameter sector of the respective
operating element.
20.2.1.1
20.2.2 Setting the access control
If access control has been activated, the user has the option
of editing this function directly on the Comfort Panel. It
would be practical to pre-configure the access control in
the IP project. The respective editor can be called up in the
parameter section of the Comfort Panel via the button
Ac-
cess control
or via the menu under
Comfort Panel > Opti-
onal software modules > Access control
.
Note:
The editor for access control can only be called up if this
software module has been previously activated (see
Activating additional applications ).
20.2.2.1 Setting the user levels
To activate the user levels, select the entry
Access level
in