86
Auxiliary functions
Type 8792, 8793 REV.2
16.1
Activating and deactivating auxiliary functions
The required auxiliary functions must be activated by the user initially by incorporation into the main menu
(MAIN). The parameters for the auxiliary functions can then be set.
To deactivate a function, remove it from the main menu. This will cause the previous settings, created under
this function, to be rendered invalid again.
16.1.1
Including auxiliary functions in the main menu
Add auxiliary functions to ADD.FUNCTION as follows:
→
Press
MENU
for 3 s. Switching from process level
setting level.
→
/ Select
ADD.FUNCTION
.
→
Select
ENTER
. The possible auxiliary functions are displayed.
→
/ Select required auxiliary function
→
Select
ENTER
. The selected auxiliary function is now marked by a cross .
→
Select
EXIT
. Acknowledgment and simultaneous return to the main menu (MAIN).
The marked function is now activated and incorporated into the main menu.
You have added the auxiliary functions.
Set the parameters of the auxiliary functions as follows:
→
/ Select auxiliary function. In the main menu (MAIN) select the auxiliary function.
→
Select
ENTER
. Opening the submenu to input the parameters.
Further information about the setting can be found in the following chapter
→
Select
EXIT *
or
ESC*.
Return to a higher level or to the main level (MAIN).
→
Select
EXIT.
Switching from setting level
process level.
You have parameterized the auxiliary functions.
* The designation of the key depends on the selected auxiliary function.
The changed data is saved in the memory (EEPROM) only when there is a switch to the process
level, by leaving the main menu (MAIN) using the left selection key
EXIT
.
english
Summary of Contents for 8792
Page 196: ...www burkert com ...