110
Auxiliary functions
Type 8792, 8793 REV.2
•
OUT.type
- Setting the switching status
In addition to selecting the output, the switching status required for the binary output must be entered.
See following “Table 64”.
Enter the OUT.type as follows:
→
/ Select
OUT.type
.
→
Select
SELEC
. The switching statuses
normally open
and
normally closed
are displayed.
→
/ Select switching status.
→
Select
SELEC
. The selection is marked by a filled circle .
→
Select
EXIT
. Acknowledgment and simultaneous return to the
OUT BIN 1/2
menu.
→
Select
EXIT
. Acknowledgment and simultaneous return to the
OUTPUT
menu.
→
Select
EXIT
. Acknowledgment and simultaneous return to the main menu (MAIN).
→
Select
EXIT
. Switching from setting level
process level.
You have entered
OUT.type
.
Switching signal
Switching statuses
normally open
normally closed
0
0 V
24 V
1
24 V
0 V
Table 36:
OUT BIN 1/2; switching statuses
The changed data is saved in the memory (EEPROM) only when there is a switch to the process
level, by leaving the main menu (MAIN) using the left selection key
EXIT
.
english
Summary of Contents for 8792
Page 196: ...www burkert com ...
