142
Auxiliary functions
Type 8792, 8793 REV.2
16.2.1.1.
X.TUNE.CONFIG
– Configuration of the
X.TUNE
function
In this menu you can specify which functions are to be executed when the
X.TUNE
function is running
automatically.
Specify the functions in X.TUNE.CONFIG as follows:
→
/ Select
X.TUNE.CONFIG
.
→
Select
ENTER
.The functions for automatic self-parameterization by
X.TUNE
are displayed.
→
/ Select required function.
→
Select
SELEC
. Activate the function by checking the box .
→
Select required functions in succession using the arrow keys / and activate by checking the box .
→
Select
EXIT
. Return to the
Manual.TUNE menu
.
You have specified the functions in X.TUNE.CONFIG.
16.2.1.2.
X.TUNE.POS
– Setting of the end positions
In this menu you can specify whether the pneumatic actuator has mechanical end positions or not.
If there are no mechanical end positions available, these are not approached by the
X.TUNE
and must be
manually specified.
Set the end position as follows:
→
/ Select
M.TUNE.POS
.
→
Select
ENTER
.
The selection for
ACT.limit
= mechanical end positions available
ACT.nolimit
= mechanical end positions not available
is displayed.
If mechanical end positions are available
→
/ Select
ACT.limit
.
→
Select
SELEC
. The selection is marked by a filled circle .
→
Select
EXIT
. Return to the
Manual.TUNE menu
.
If mechanical end positions are not available
→
/ Select
ACT.nolimit
.
→
Select
SELEC
. The
CAL.POS
submenu for inputting the end positions is opened.
→
/ Select
POS.pMIN
.
→
Select
INPUT
. The input screen for the value of the lower end position is opened.
→
/
OPN
Increase value
CLS
Changing the decimal place
Approach lower end position of the valve.
→
Select
OK
. Transfer and simultaneous return to the
CAL.POS
menu.
→
/ Select
POS.pMAX
.
english
Summary of Contents for 8792
Page 196: ...www burkert com ...
