106
Auxiliary functions
Type 8792, 8793 REV.2
16.1.16.1.
OUT ANALOG
- Configuration of the analog output
Type 8792:
The feedback of the current position (
POS
) or of the set-point value (
CMD
) can be transmitted to
the control center via the analog output.
Type 8793:
The feedback of the current position (
POS
) or of the set-point value (
CMD
), of the process actual
value
(PV)
or of the process set-point value
(SP)
can be transmitted to the control center via the
analog output.
Configure the analog output as follows: (Setting on the process level)
→
/ Select
OUT ANALOG
. (To do this, the auxiliary function must be incorporated into the main menu).
→
Select
ENTER
. The input screen for configuring the analog output is displayed.
→
/ Select
POS.
Output of the actual position.
→
Select
SELEC
. The selection is marked by a filled circle .
→
/ Select
CMD.
Output of the set-point position.
→
Select
SELEC
. The selection is marked by a filled circle .
→
/ Select
PV.
Output of the process actual value.
(
Only for Type 8793,
process control)
→
Select
SELEC
. The selection is marked by a filled circle .
→
/ Select
SP. (
Only for Type 8793
(process control)
→
Select
SELEC
. Output of the process set-point value.
→
/ Select
OUT.type.
Selection of the standard signal.
→
Select
ENTER
and configure the standard signal.
→
/ Select standard signal
.
→
Select
SELECT
. The selection is marked by a filled circle .
→
Select
EXIT
and return to the OUT.type menu.
→
Select
EXIT
and return to the OUT ANALOG menu.
You have configured the analog output.
english
Summary of Contents for 8792
Page 196: ...www burkert com ...