Brother DCP Series Service Manual Download Page 16

Page: 16 / 309

xiii

Confidential

SAFETY INFORMATION

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injures.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result
in damage to property or loss of product functionality.

NOTE

Notes tell you how you should respond to a situation that may arise or give tips about
how the operation works with other features.

Prohibition icons indicate actions that must not be performed.

This icon indicates that flammable sprays must not be used.

This icon indicates that organic solvents such as alcohol and liquids must not be used.

Electrical Hazard icons alert you to possible electrical shocks.

Fire Hazard icons alert you to the possibility of fire.

Bold

Bold typeface identifies specific keys on the machineÅfs control panel or on the
computer screen.

Italics

Italicized typeface emphasizes an important point or refers you to a related topic.

Courier New

Text in Courier New font identifies messages on the LCD of the machine.

Follow all warnings and instructions marked on the machine.

Summary of Contents for DCP Series






















































































































































































































































































































Search results

Summary of Contents for DCP Series

Reviews:

Related manuals for DCP Series

Brands by name

Popular brands

Brother DCP Series, Service Manual

Search results

Summary of Contents for DCP Series

Reviews:

Related manuals for DCP Series

Brands by name

Popular brands