Brother DCP Series, Service Manual

Page: 44 / 309

2-12 Confidential
3.2 Error Messages
First Line Status
Error
Code
Reference
B&W 1-sided Print
Only
Replace Ink
/Refill [XX] Ink Ink ejection has reached the specified
number of times when the Ink remaining
sensor detects that the ink replacement / refill
period is approaching. Only black printing is
possible. 27, 28,
29 2-21
BT Call Sign On
(UK only)
The receiving mode cannot be changed
since the BT Call sign is ON.
Cannot Detect
The Ink cartridge cannot be detected
properly.
20, 21,
22, 23,
24, 25 2-19,
2-20
Cannot Detect Ink
Volume
The ink volume cannot be detected properly.
Cannot Print
Replace Ink
/Refill [XX] Ink
Ink ejection has reached the specified
number of times when the Ink remaining
sensor detects that the ink replacement / refill
period is approaching. 26, 27,
28, 29 2-21
Close Ink Cover An open Ink cover was detected. 2F 2-23
Comm.Error A problem occurred in fax communication.
Section
4.9
Connection Fail The receiver fax cannot set Polling.
Section
4.9
Cover is Open. An open Scanner cover was detected. A1 2-40
Data Remaining in
Memory Data cannot be processed since the memory
is full. Section
4.10.2
Disconnected The receiver's fax machine stopped.
Section
4.9.1
Document Jam
The Document scanning sensor detected a
document jam inside the ADF. A2, A3 2-40,
2-41
DR Mode in Use
The receiving mode cannot be changed from
manual to other modes since the Distinctive
Ring mode is enabled. Section
4.9
High Temperature
The Casing internal thermistor detected that
the room temperature is too high.