Assembly, Removal, and Electrical Installation
DOK-CONTRL-ILPSDO8****-AW04-EN-P
Bosch Rexroth AG
Rexroth Inline Module with Safe Digital Outputs R-IB IL 24 PSDO 8-PAC
5
Assembly, Removal, and Electrical Installation
5.1
Assembly and Removal
5.1.1
Unpacking the Module
The module is supplied in an ESD box together with a package slip with installation
instructions. Please read the complete package slip carefully.
The module may only be installed and removed by qualified personnel.
5.1.2
General
The R-IB IL 24 PSDO 8-PAC safety terminal is designed for use within a Rexroth
Inline station. Only use the safety terminal in the 24 V DC area of an Inline station.
To ensure reliable operation, install the safety terminal in housing protected from
dust and humidity (IP54 or higher). In order to prevent manipulation, secure the
housing (control cabinet/control box) against being opened by unauthorized
persons.
Mount all Inline terminals on 35 mm DIN rails.
Only connect the cables using the supplied Rexroth Inline connectors or Inline
connectors listed in the ordering data.
Electrostatic discharge
The safety module contains components that can be damaged or destroyed by
electrostatic discharge. When handling the safety module, observe the necessary
safety precautions against electrostatic discharge (ESD) according to
EN 61340-5-1 and EN 61340-5-2.
NOTICE
Unintentional machine startup
Do not assemble or remove the module while the power is connected.
Before assembling or removing the module, disconnect the power to the module
and the entire Rexroth Inline station and ensure that it cannot be switched on
again.
Make sure the entire station is reassembled before switching the power back on.
Observe the diagnostic indicators and any diagnostic messages.
The system may only be started provided neither the station nor the system poses
a hazard.
WARNING
