Product Description
DOK-CONTRL-ILPSDO8****-AW04-EN-P
Bosch Rexroth AG
Rexroth Inline Module with Safe Digital Outputs R-IB IL 24 PSDO 8-PAC
3
Product Description
3.1
Brief Description of the Safety Module
The R-IB IL 24 PSDO 8-PAC module is an output module, which is designed for
use within a Rexroth Inline station.
The R-IB IL 24 PSDO 8-PAC safety module can be used as part of an Rexroth
Inline station at any point within a PROFIsafe system.
One transmission speed must be used seamlessly in a Rexroth Inline
station.Please note that standard Rexroth Inline modules operate with 500 kbaud
only. Therefore, you also have to set the baud rate of the safety modules to 500
kbaud in a combined system.
The module has a 10-pos. DIP switch, which is used to set the PROFIsafe
address.
The module has four safe positive switching digital outputs for two-channel
assignment or eight safe positive switching digital outputs for single-channel
assignment.
The outputs can be parameterized according to the application and enable the
integration of actuators in the PROFIsafe system.
Within a PROFIsafe system, the safety module can be used to achieve safety
functions with the following requirements depending on the conditions of use:
•
Up to SIL 3 according to standard EN 61508
•
Up to SIL CL 3 according to standard EN 62061
•
Up to Cat. 4/PL e according to standard EN ISO 13849-1
The output data is exchanged between the safe controller and the module using
safety-relevant messages.
