For Your Safety
DOK-CONTRL-ILPSDO8****-AW04-EN-P
Bosch Rexroth AG
Rexroth Inline Module with Safe Digital Outputs R-IB IL 24 PSDO 8-PAC
2.4
Directives and Standards
The manufacturers and operators of machines and systems, in which the
R-IB IL 24 PSDO 8-PAC module is used, are responsible for adhering to all
applicable directives and legislation.
For the standards observed by the module, please refer to the certificate issued by
the approval body and the EC declaration of conformity. These documents are
available on the Internet at
www.boschrexroth.com/electrics
.
2.5
Correct Usage
Only use the PROFIsafe system in accordance with the instructions in this section.
The R-IB IL 24 PSDO 8-PAC safety module is designed exclusively for use in a
PROFIsafe system.
It can only perform its safety-related tasks within the system if it has been
integrated into the execution process correctly and in such a way as to avoid
errors.
You must observe all information in this application description as well as in the
documents listed in
. In particular, only use the
module according to the technical data and ambient conditions specified in
Chapter 11, “Technical Data and Ordering Data”
on
Within a PROFIsafe system, the safety module can be used to achieve safety
functions with the following requirements depending on the conditions of use:
•
Up to SIL 3 according to standard EN 61508
•
Up to SIL CL 3 according to standard EN 62061
•
Up to Cat. 4/PL e according to standard EN ISO 13849-1
It is designed for connecting single-channel or two-channel actuators, which can
be used in association with safety technology.
For example, the module can be used in the following applications:
•
Safety circuits according to EN 60204 Part 1
•
Safe shutdown of contactors, motors (24 V DC), valves, ohmic, inductive,
and capacitive loads
The module is
not
suitable for applications, in which stop category 1 also has to be
observed in the event of an error.
