3 608 870 A47
Tightening Technology |
Bosch Rexroth AG 213
Nexo cordless Wi-Fi nutrunner
| 3 608 870 A47/2019-10
Views on the nutrunner display
The following views can be shown on the nutrunner display:
Table 9–58:
Views on the nutrunner display
Screen
Description
Actual values
Screen displaying the current tightening results:
– Torque (T)
– Angle (A)
– Time (t)
– Identification code (ID)
The display is based on the tightening result - OK or NOK. For NOK tightening, the screen is
flashing with the parameter causing the NOK result highlighted in red.
Program selection
A program selection of configured tightening programs available for selection if the Prog0 -
Prog7 PLC signals are fully applied on the
tool
PLC module.
Job select
As of Nexo firmware version 1300. A job selection of configured jobs available for selection if
the Job0 - Job7 PLC signals are fully applied on the
tool
PLC module.
Aborts a job
On the tool display, the active job can be canceled.
Operating mode
As of Nexo firmware version 1300. Change-over between manual mode (manual) and
automatic mode (automatic).
ID code display
Display of the current ID code.
Diagnosis
Display of the diagnosis data of the active network data and control services.
Language selection
Selection of the nutrunner display language:
Chinese, German, English, Spanish, French, Italian, Hungarian, Polish, Portuguese, Slovak,
Czech, Russian
Date & time
System time settings (date and time).
Design
Selection of day or night design for the screen display.
Backup/Restore
1
)
1 As of Nexo firmware version 1200, the
Backup/Restore
option is activated by default in the main
menu on delivery of the Nexo cordless Wi-Fi nutrunner. The activation of this option supports initial
commissioning. After commissioning of the Nexo cordless Wi-Fi nutrunner, this option is to be
deactivated again to prevent triggering of unintended functions like starting a backup.
Creates a backup copy or imports backup data from the nutrunner NX-SD Micro SD card.
WLAN on/off
Under this setting, the WLAN connection can be activated, deactivated or re-established.
Switch-off
Via the nutrunner display, the nutrunner can be switched off or restarted.
Image view
Image viewer. The images for this screen have to be stored on the NX-SD Micro SD card in
the
pictures
directory. The supported image formats are
*.jpg
and
*.png
. Go to the Help menu
to upload the respective images to the nutrunner display
Game 1
Play selection.
System information
Screen displaying hardware and software version of the Nexo cordless Wi-Fi nutrunner as
well as additional information like IP address and WLAN network.
BMW-TPC
As of Nexo firmware version 1400: Display of the current BMW-TPC order.
