Bosch MCC9555FWC, User Manual

Page: 125 / 152

Troubleshooting
en
125
Fault Cause and troubleshooting
Drive and heating ele-
ment are not working.
"Demo mode" ap-
pears on the display. "Demo mode" is activated.
1.
Disconnect the appliance from the power supply
and switch the appliance back on.
2.
Deactivate "Demo mode" within 5 minutes.
→
"Changing the basic settings", Page 117
Operation switches
off. Ingredients are distributed unevenly.
▶
Distribute the ingredients evenly in the pot.
Processing quantity is too high.
▶
Reduce the processing quantity.
Incorrect tool is inserted.
▶
Insert the right tool.
Appliance is exposed to excessive vibrations.
▶
Set up the appliance on a stable, level, clean and
flat work surface.
→
"Setting up the appliance", Page 91
Scales are not meas-
uring correctly. Base is uneven.
▶
Set up the appliance on a stable, level, clean and
flat work surface.
→
"Setting up the appliance", Page 91
Rubber suction feet are soiled.
▶
Wipe the rubber suction feet with a damp cloth.
Power cord pulled too tight.
▶
Make sure that the power cord is not pulled too
tight.
→
"Connecting the appliance to the electricity sup-
ply", Page 92
Lid cannot be opened. Lid lock mechanism is active.
▶
End the current operation and wait 3 seconds.
1.
Disconnect the appliance from the power supply for
30 seconds.
2.
Switch the appliance back on.
▶
Take the pot vertically out of the main unit.
Lid cannot be opened
or closed. Cover for the outer lid is not at the unlocking position.
▶
Move the cover for the outer lid to the unlocking po-
sition.
→
"Opening and closing the lid", Page 104
Appliance makes a
loud clicking sound.
The display shows . Lid lock is being activated or deactivated.
▶
The clicking sound is normal and can be disreg-
arded.
→
"Lid lock", Page 116