Bosch MCC9555FWC, User Manual

Page: 117 / 152

Basic settings
en
117
Activating button lock
▶
Simultaneously press and for
3 seconds.
a The keylock has now been activ-
ated.
a
The display shows ⁠.
Tips
¡
You can pause the current process
despite the keylock by pressing ⁠.
¡
If you are cleaning the main unit,
you can use the keylock for wipe
protection.
Deactivating button lock
▶
Simultaneously press and for
3 seconds.
a
The button lock has now been de-
activated.
19 Basic settings
You can configure the appliance to
meet your needs.
19.1 Changing the basic set-
tings
You can configure the appliance to
meet your needs.
1.
Press in the main menu.
a
The display shows the list of basic
settings.
2.
Select the settings you require.
a
The settings will be automatically
saved.
3.
To exit the basic settings, press ⁠.
19.2 Overview of the basic settings
You can find an overview of the basic settings here.
Setting Selection Description
Home Connect Selection depends on
the network status and
whether the appliance is
connected to HomeCon-
nect.
The display shows net-
work information:
¡
IP
¡
SSID
¡
MAC address
¡
Serial number
Set up Home Connect.
→
"Home Connect ",
Page 114
Select settings for Home
Connect.
→
"Overview of the
Home Connect settings",
Page 115
Standby after 5 mins - 1 hr
15 mins
1
Set the duration after
which the appliance
automatically switches to
standby mode if there is
no action on the display
or if the appliance is run-
ning.
Display brightness 10% - 100%
50%
1
Set the display bright-
ness in 10% steps.
1
Factory setting