Understanding the LCD Menus
76
For SD interlaced output formats (e.g. 486i59.94, 576i50), ONLY blackburst (BLACK) may be used.
The frame rate must match the output format (59.94 or 50).
For HD interlaced output formats (e.g. 1080i59.94, 1080i50), either blackburst (BLACK) or tri-level
interlaced (TRI-I), in the respective frame rate (59.94 or 50), may be used.
For HD Progressive Segmented Frame output formats (e.g. 1080PsF23.98, 1080PsF25), either
blackburst (BLACK) or tri-level interlaced (TRI-I), in the respective frame rate (59.94 or 50), may
be used.
For HD progressive output formats (e.g. 720p59.94 or 720p50), either blackburst (BLACK) or tri-level
progressive (TRI-P), in the respective frame rate (59.94 or 50), may be used.
Examples:
Output Format
Applicable External Reference
Comments
486i59.94
Black (59.94) only
Tri-I and Tri-P are not applicable
576i50
Black (50) only
Tri-I and Tri-P are not applicable
1080i59.94
Black (59.94) or Tri-I (59.94)
Tri-P is not applicable
720p59.94
Black (59.94) or Tri-P (59.94)
Tri-I is not applicable
Please note that if External reference is selected and a valid reference signal has been applied, the REF
Status LED on the front panel will be illuminated.
If the external reference is removed or lost, the processor will go into a free run condition until the reference
is restored. The REF Status LED on the front panel will be NOT be illuminated.
Main Menu
Back
Audio
Setup
3D
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
Setup
Back
Audio
Video
Reference
2
Setup
External
Input
Reference Type
Back
Pixel
Offset
Line
Offset
Type
3
Reference / Type
