Understanding the LCD Menus
53
Mode Select
– When Mode is selected, five available timecode modes will be displayed. Detailed
descriptions for each mode are provided on the following pages.
- Off (default)
- Generate
- Input
- Jam Sync
- Input Regen
Setup
– Displays the Timecode Setup menu, described below
Start Source
– The timecode source may be the timecode from the Input video or a Start Value
defined by you in the internal timecode generator.
Set Timecode
– Displays the timecode register fields. This control is only active when Generate or
Jam Sync modes are selected via the Mode selection above.
Start
– Manually starts the internal timecode generator or initiates the Jam Sync mode, depending
on current settings.
Timecode Setup Menu
The items found in the timecode Setup menu are typically set for automatic (AUTO) operation. However,
some projects may require custom settings, which are described on the following pages. The possible
settings are:
Input Line
– The timecode Input Line setting defines the line on which timecode will be detected
in the input video.
Output Line
– The timecode Output Line setting defines the line on which timecode will be
inserted in the output video.
DF Mode
– The DF Mode menu allows you to select between Automatic, Drop Frame or Non
Drop Frame timecode modes.
Timecode Source
– This setting permits you to select the source for your timecode.
- ATC / VITC (default)
- LTC
Jam Sync
Generate
Input Regen
Input
Off
Timecode
Back
Next
Start
Source
Setup
Start
Prev
Set
Timecode
Mode
1
Mode Select
