Understanding the Control Panel
31
Press the pushbutton of the desired parameter. The button will immediately turn green and the
corresponding LCD Menu will be displayed (see below). Turn the rotary encoder to adjust the
parameter. You can push the rotary encoder to reset the parameter to its default value. Once
the adjustment is complete, the button will remain illuminated white, indicating that it is not at its default
value.
For more details about these controls, see the Proc Amp section in the Video Menu chapter.
Presets
PRESET BUTTONS (1 – 6)
Six Presets are available, which allow the user to save and recall custom settings for the system.
To
SAVE
a preset into memory, press and HOLD the desired preset button number for three
seconds. The button will flash to indicate that the save command has been completed. The
pushbutton will remain illuminated to indicate that parameters were stored and are available for
recall.
To
RECALL
a preset, press the desired preset button 1 through 6. A message will be displayed on
the LCD requiring you to “Accept” or “Cancel” your request. Once the preset has been recalled,
the corresponding preset button will remain lit. If any system parameter is changed, the Preset
button will turn off.
Please note that under certain conditions, recalling a preset may cause a disruption or loss of output video
and audio while the new parameters are being loaded. An example would be a preset that calls for a
change in format conversion. The Processor must load new software code to affect the new conversion,
which will cause a loss of output for a few seconds. A preset that only changes Proc Amp settings or Aspect
Ratio settings will not typically cause a loss of output. If you are operating in a live, “on the air” environment,
be sure to test your presets prior to using them.
Set Value
0
Back
Sharp
Hue
Black
Reset
All
R-Y
B-Y
Saturate
Gain
Recall Preset 1?
Accept
Cancel
Presets - Right Side of Panel
IN
OUT
SDI
VIDEO
VIDEO
HDMI
ANLG
AUDIO
AUDIO
EMBED
AES
ANLG
FORMAT
FORMAT
486
720
2K
1080
576
1080
FRAME
FRAME
P
I
PSF
MENU
MENU
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
RATE
RATE
23.98
25
29.97
30
24
50
59.94
60
VIDEO
VIDEO
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
PRESETS
AUDIO STATUS
SYSTEM STATUS
PRESETS
1
3
5
2
4
6
ANAM
LBOX
PBOX
ASPECT
ASPECT
SMART
14:9
CCUT
ZOOM
ADJ
L
R
GND
+12V
GND
AUX POWER
STEREO IN
AES/EBU DIGITAL AUDIO IN/OUT
ANALOG AUDIO IN/OUT
REF IN
Y/NTSC/PAL
IN
SD/HD/3G-SDI
B-Y IN
IN
LOOP
OUT
OUT
R-Y IN
B-Y OUT
R-Y OUT
Y/NTSC/PAL
OUT
HDMI IN
HDMI OUT
REMOTE IN/OUT
SD/HD/3G-SDI
IN
OUT
SDI
VIDEO
VIDEO
HDMI
ANLG
AUDIO
AUDIO
EMBED
AES
ANLG
FORMAT
FORMAT
486
720
2K
1080
576
1080
FRAME
FRAME
P
I
PSF
MENU
MENU
HOME
MENU
1
MENU
2
REM
LOCK
PANEL
LOCK
RATE
RATE
23.98
25
29.97
30
24
50
59.94
60
VIDEO
VIDEO
GAIN
SAT
R-Y
B-Y
BLK
HUE
SHARP
PRESETS
AUDIO STATUS
SYSTEM STATUS
PRESETS
1
3
5
2
4
6
ANAM
LBOX
PBOX
ASPECT
ASPECT
SMART
14:9
CCUT
ZOOM
ADJ
L
R
GND
+12V
GND
AUX POWER
STEREO IN
AES/EBU DIGITAL AUDIO IN/OUT
ANALOG AUDIO IN/OUT
REF IN
Y/NTSC/PAL
IN
SD/HD/3G-SDI
B-Y IN
IN
LOOP
OUT
OUT
R-Y IN
B-Y OUT
R-Y OUT
Y/NTSC/PAL
OUT
HDMI IN
HDMI OUT
REMOTE IN/OUT
SD/HD/3G-SDI
