Understanding the LCD Menus
75
External Reference
The output streams may be synchronized to either Input A or to an external reference of Blackburst or
Tri-level sync supplied to the REF rear panel connector. You may select the reference Type in the
Setup
/ Reference
LCD menu.
When utilizing genlock, the user interface controls both channel A and B, enabling both output streams to
remain pixel locked, even when adjusted relative to the selected reference source.
Setup Menu
The Setup menu provides access to the external Reference, Video and Audio Setup menus.
Reference
– Allows selection and timing adjustment of the external reference, if used.
Video
– Allows selection of the signal types to be used for the analog video input and output.
In the Teranex 3D Processor, allows selection of video Output Sampling rates and Dual Link
Output (On/Off).
Audio
– Permits selection of the desired analog audio input connections to be used on the rear
panel, RCA Phono or XLR/DB25.
Reference Setup Menu
The Reference menu allows you to lock the processor to your input video source or to an external reference.
Input
– Selects the current input video source as the reference.
External
– Selects the external reference (REF) input.
Valid external reference signals that may be used are dependent on the OUTPUT format conversion you
have chosen. The Processor will auto-detect the reference source, but the reference you are using must be
compatible with the output format.
Setup
Back
Audio
Video
Reference
2
Setup
Main Menu
Back
Audio
Setup
3D
Ancillary
Data
Noise
Reduction
Video
1
Main Menu
