Black Box MDS921AE-10BTS-R2, User Manual

Page: 95 / 113

SMARTLINK
I&II
MDS921AE-10BTS - MDS
Administration
You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol),
supervisor information and SNTP (Simple Network Time Protocol) in
admin .
For configuration the parameters, move the cur
>> user
Manage user profile
security Setup system security
snmp Configure SNMP parameter
passwd Change supervisor password
id Change supervisor ID
sntp Configure time synchronization
User Profile
You can use
user command to clear, modify and list the user profile. You can setup at most five
users to access the router via console port or telnet in user profile table however users who have
the supervisor password can change the configuration
and press enter key.
>> clear
Clear user profile
modify Modify the user profile
list List the user profile
You can delete the user by number using
user, you can use
list command to check it.
or add a new user to user profile.
To modify or add a new user, move the cursor to modify and press enter.
----------------------------------------------------------------------
Command: admin user modify <1~5> <more...>
Message: Please input the following information.
Legal access user profile number <1~5> :
----------------------------------------------------
The screen will prompt as follow.
>> Attrib
UI mode
Profile User name and password
There are two UI mode, command and menu mode, to setup the product. We will not discuss
command mode in this manual.
Security
Security command can be configured sixteen legal IP address for telnet access and telnet port
number.
S957AE-10BTS User Manual
Page 95 of 113
You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol),
supervisor information and SNTP (Simple Network Time Protocol) in
admin . The route is
For configuration the parameters, move the cursor “ >> “ to admin and press enter.
Manage user profile
Setup system security
Configure SNMP parameter
Change supervisor password
Change supervisor ID
Configure time synchronization
command to clear, modify and list the user profile. You can setup at most five
users to access the router via console port or telnet in user profile table however users who have
the supervisor password can change the configuration of the router. Move the cursor “
Clear user profile
Modify the user profile
List the user profile
You can delete the user by number using clear command. If you do not make sure the number of
command to check it. Modify command is to modify an old user information
or add a new user to user profile.
To modify or add a new user, move the cursor to modify and press enter.
-------------------------------------------------------------------
Command: admin user modify <1~5> <more...>
Message: Please input the following information.
Legal access user profile number <1~5> : 2
----------------------------------------------------------------------
The screen will prompt as follow.
UI mode
User name and password
There are two UI mode, command and menu mode, to setup the product. We will not discuss
command mode in this manual.
Security command can be configured sixteen legal IP address for telnet access and telnet port
You can modify the user profile, telnet access, SNMP (Sample Network Management Protocol),
. The route is enable
and press enter.
command to clear, modify and list the user profile. You can setup at most five
users to access the router via console port or telnet in user profile table however users who have
of the router. Move the cursor “ >> “ to user
command. If you do not make sure the number of
command is to modify an old user information
There are two UI mode, command and menu mode, to setup the product. We will not discuss
Security command can be configured sixteen legal IP address for telnet access and telnet port