SMARTLINK
I&II
MDS921AE-10BTS - MDS
Route
If the Router is connected to more than one network,
between them. A static route is a pre
reach a specific host or network.
With Dynamic Routing, you can enable the Router to automatically adjust to phys
the network’s layout. The Router, using the RIP protocol, determines the network packets’ route
based on the fewest number of hops between the source and the destination. The RIP protocol
regularly broadcasts routing information to other ro
Click Route to modify the routing information.
To modify the RIP (Routing information protocol) Parameters:
RIP Mode: Enable
Auto RIP Summary: Enable
Press Modify
S957AE-10BTS User Manual
Page 47 of 113
If the Router is connected to more than one network, it may be necessary to set up a static route
between them. A static route is a pre-determined pathway that network information must travel to
reach a specific host or network.
With Dynamic Routing, you can enable the Router to automatically adjust to phys
the network’s layout. The Router, using the RIP protocol, determines the network packets’ route
based on the fewest number of hops between the source and the destination. The RIP protocol
regularly broadcasts routing information to other routers on the network.
to modify the routing information.
To modify the RIP (Routing information protocol) Parameters:
it may be necessary to set up a static route
determined pathway that network information must travel to
With Dynamic Routing, you can enable the Router to automatically adjust to physical changes in
the network’s layout. The Router, using the RIP protocol, determines the network packets’ route
based on the fewest number of hops between the source and the destination. The RIP protocol
