SMARTLINK
I&II
MDS921AE-10BTS - MDS
Bridge
If your router is setup in bridge mode and you want to setup advanced filter function, you can use
BRIDGE menu to setup the filter function, blocking function.
Click Bridge to setup.
Press Add to add the static bridge information.
If you want to filter the definate MAC address of LAN PC to access Internet, press
the filtering table. Key the MAC address in MAC address field and select Filter in LAN field.
If you want to filter the definate MAC address of WAN PC to access LAN, pr
the filtering table. Key the MAC address in MAC address field and select Filter in WAN field. For
example: if your VC is setup at WAN 1, select WAN 1 Filter.
The screen will prompt the parameters that will be written
before writing in EPROM.
S957AE-10BTS User Manual
Page 43 of 113
If your router is setup in bridge mode and you want to setup advanced filter function, you can use
BRIDGE menu to setup the filter function, blocking function.
to add the static bridge information.
filter the definate MAC address of LAN PC to access Internet, press
the filtering table. Key the MAC address in MAC address field and select Filter in LAN field.
If you want to filter the definate MAC address of WAN PC to access LAN, pr
the filtering table. Key the MAC address in MAC address field and select Filter in WAN field. For
example: if your VC is setup at WAN 1, select WAN 1 Filter.
The screen will prompt the parameters that will be written to the EPROM. Check the parameters
If your router is setup in bridge mode and you want to setup advanced filter function, you can use
filter the definate MAC address of LAN PC to access Internet, press Add to establish
the filtering table. Key the MAC address in MAC address field and select Filter in LAN field.
If you want to filter the definate MAC address of WAN PC to access LAN, press Add to establish
the filtering table. Key the MAC address in MAC address field and select Filter in WAN field. For
Check the parameters
