SMARTLINK
I&II
MDS921AE-10BTS - MDS
IP QoS
IP QoS is a good function to decide which PCs can get the priorities to pass though router once if
the bandwidth is exhausted or fully saturated.
Click Enable at item Trigger IP QoS Service in General IP QoS Parameter, which turn on this
function if you want to enable it.
Click Add in the bottom of web page to begin a new entry in Policy table.
Set the policy to action:
Description: A brief statement describe this policy
Local IP: type IP address of local host in prioritized session.
Remote IP: type IP address of remote
Local Port: type the service port number of local host in prioritized session.
Remote Port: type the service port number of remote host in prioritized session.
Protocol: identify the transportation layer protocol type you wa
default is ANY.
Precedence: type the session’s prioritized level you classify, “0” is lowest priority, “5” is highest
priority.
S957AE-10BTS User Manual
Page 66 of 113
to decide which PCs can get the priorities to pass though router once if
the bandwidth is exhausted or fully saturated.
at item Trigger IP QoS Service in General IP QoS Parameter, which turn on this
function if you want to enable it.
in the bottom of web page to begin a new entry in Policy table.
Description: A brief statement describe this policy
Local IP: type IP address of local host in prioritized session.
Remote IP: type IP address of remote host in prioritized session.
Local Port: type the service port number of local host in prioritized session.
Remote Port: type the service port number of remote host in prioritized session.
Protocol: identify the transportation layer protocol type you want to prioritize, ex: TCP or UDP. The
Precedence: type the session’s prioritized level you classify, “0” is lowest priority, “5” is highest
to decide which PCs can get the priorities to pass though router once if
at item Trigger IP QoS Service in General IP QoS Parameter, which turn on this
Remote Port: type the service port number of remote host in prioritized session.
nt to prioritize, ex: TCP or UDP. The
Precedence: type the session’s prioritized level you classify, “0” is lowest priority, “5” is highest
