SMARTLINK
I&II
MDS921AE-10BTS - MDS
WAN
The SHDSL or SHDSL.bis router supports up to 8 PVCs. WAN 1 was configured via BASIC except
QoS. If you want to setup another
hand, you must apply two or more Internet Services with ISPs otherwise you do not need to setup
WAN.
The WAN Number 1 will be the parameters setup in Basic Setup. If you want to setup another PVC
you can configure them in WAN 2 to WAN 8.
Enter the parameters.
If WAN protocol is PPPoA or PPPoE with dynamic IP, leave the default WAN IP address and
Subnet Mask as default setting. The system will ingore the IP address and Subnet mask
information but deleating or leaving blank the items will cause system error.
If the WAN protocol is IPoA or EoA, leave the ISP parameters as default setting. The system will
ingore the information but deleating or leaving blank the items will cause system error.
QoS (Quality of Service): The Traffic Management Specification V4.0 defines ATM service
cataloges that describe both the traffic transmitted by users onto a network as well as the Quailty of
Service that the network need to provide for that traffic.
UBR (Unspecified Bit Rate) is the simplest service provided by ATM networks. There is no
guarantee of anything. It is a primary service used for transferring Internet traffic over the ATM
network.
CBR (Constant Bit Rate) is used by connections that requires a stati
avilable during the connection life time. This bandwidth is characterized by Peak Cell Rate. Based
on the PCR of the CBR traffic, specific cell slots are assigned for the VC in the schedule table. The
ATM always sends a signle cell duting the CBR connection’s assigned cell slot.
VBR-rt (Varible Bit Rate real-
over IP and video comferencing, that require tightly constrained delays and delay variation. VBR
is characterized by a peak cell rate (PCR), substained cell rate (SCR), and maximun burst rate
(MBR).
VBR-nrt (Varible Bit Rate non
PCR (Peak Cell Rate) in kbps: The maximum rate at which you expect to transmit data, voice and
video. Consider PCR and MBS as a menas of reducing lantency, not increasing bandwidth. The
range of PCR is 64kbps to 2400kbps
SCR (Substained Cell Rate): The sustained rate at which you expect to transmit data, voice and
video. Consider SCR to be the true bandwidth of a
The range of SCR is 64kbps to 2400kbps.
MBS (Maximum Burst Size): The amount of time or the duration at which the router sends at PCR.
The range of MBS is 1 cell to 255 cells.
Press Finish to finish setting.
S957AE-10BTS User Manual
Page 41 of 113
The SHDSL or SHDSL.bis router supports up to 8 PVCs. WAN 1 was configured via BASIC except
QoS. If you want to setup another PVCs, 2 to 7, the parameters are setup in WAN. On the other
hand, you must apply two or more Internet Services with ISPs otherwise you do not need to setup
The WAN Number 1 will be the parameters setup in Basic Setup. If you want to setup another PVC
you can configure them in WAN 2 to WAN 8.
If WAN protocol is PPPoA or PPPoE with dynamic IP, leave the default WAN IP address and
Subnet Mask as default setting. The system will ingore the IP address and Subnet mask
deleating or leaving blank the items will cause system error.
If the WAN protocol is IPoA or EoA, leave the ISP parameters as default setting. The system will
ingore the information but deleating or leaving blank the items will cause system error.
Quality of Service): The Traffic Management Specification V4.0 defines ATM service
cataloges that describe both the traffic transmitted by users onto a network as well as the Quailty of
Service that the network need to provide for that traffic.
cified Bit Rate) is the simplest service provided by ATM networks. There is no
guarantee of anything. It is a primary service used for transferring Internet traffic over the ATM
CBR (Constant Bit Rate) is used by connections that requires a static amount of bandwidth that is
avilable during the connection life time. This bandwidth is characterized by Peak Cell Rate. Based
on the PCR of the CBR traffic, specific cell slots are assigned for the VC in the schedule table. The
cell duting the CBR connection’s assigned cell slot.
-time) is intended for real-time applications, such as compressed voice
over IP and video comferencing, that require tightly constrained delays and delay variation. VBR
is characterized by a peak cell rate (PCR), substained cell rate (SCR), and maximun burst rate
nrt (Varible Bit Rate non-real-time)
PCR (Peak Cell Rate) in kbps: The maximum rate at which you expect to transmit data, voice and
PCR and MBS as a menas of reducing lantency, not increasing bandwidth. The
range of PCR is 64kbps to 2400kbps
SCR (Substained Cell Rate): The sustained rate at which you expect to transmit data, voice and
video. Consider SCR to be the true bandwidth of a VC and not the lone-term average traffic rate.
The range of SCR is 64kbps to 2400kbps.
MBS (Maximum Burst Size): The amount of time or the duration at which the router sends at PCR.
The range of MBS is 1 cell to 255 cells.
to finish setting.
The SHDSL or SHDSL.bis router supports up to 8 PVCs. WAN 1 was configured via BASIC except
PVCs, 2 to 7, the parameters are setup in WAN. On the other
hand, you must apply two or more Internet Services with ISPs otherwise you do not need to setup
The WAN Number 1 will be the parameters setup in Basic Setup. If you want to setup another PVC,
If WAN protocol is PPPoA or PPPoE with dynamic IP, leave the default WAN IP address and
Subnet Mask as default setting. The system will ingore the IP address and Subnet mask
If the WAN protocol is IPoA or EoA, leave the ISP parameters as default setting. The system will
ingore the information but deleating or leaving blank the items will cause system error.
Quality of Service): The Traffic Management Specification V4.0 defines ATM service
cataloges that describe both the traffic transmitted by users onto a network as well as the Quailty of
cified Bit Rate) is the simplest service provided by ATM networks. There is no
guarantee of anything. It is a primary service used for transferring Internet traffic over the ATM
c amount of bandwidth that is
avilable during the connection life time. This bandwidth is characterized by Peak Cell Rate. Based
on the PCR of the CBR traffic, specific cell slots are assigned for the VC in the schedule table. The
cell duting the CBR connection’s assigned cell slot.
time applications, such as compressed voice
over IP and video comferencing, that require tightly constrained delays and delay variation. VBR-rt
is characterized by a peak cell rate (PCR), substained cell rate (SCR), and maximun burst rate
PCR (Peak Cell Rate) in kbps: The maximum rate at which you expect to transmit data, voice and
PCR and MBS as a menas of reducing lantency, not increasing bandwidth. The
SCR (Substained Cell Rate): The sustained rate at which you expect to transmit data, voice and
term average traffic rate.
MBS (Maximum Burst Size): The amount of time or the duration at which the router sends at PCR.
