Black Box MDS921AE-10BTS-R2 User Manual Download | Manualshive

Page: 75 / 113

background image

SMARTLINK

I&II

MDS921AE-10BTS - MDS

Note: All of the settings will be changed to factory default. On the other hand you will lose all the

configured parameters.

•

Restore Configuration: Sometime the configuration will be crushed unintentionally.
Restore configuration will help you to recover the backup configuration easily.

•

Click Finish after selecting Restore Configuration.

•

Browse the route of backup file then press finish
saved configuration.

•

Backup Configuration: After configuration, suggest using the function to backup your
router parameters in the PC.

•

Select the Backup Configuration and then press Finish.

•

Browse the place of b
backup the configuration.

Upgrade

You can upgrade the gateway using the upgrade function.
Press Upgrade.

Browse the file and press OK button to upgrade. The system will reboot
finishing.

Logout

To logout the router, press logout.

Restart

For restarting the router, click the

Press Restart to reboot the router.

S957AE-10BTS User Manual

Page 75 of 113

All of the settings will be changed to factory default. On the other hand you will lose all the
configured parameters.

Configuration: Sometime the configuration will be crushed unintentionally.

Restore configuration will help you to recover the backup configuration easily.
Click Finish after selecting Restore Configuration.
Browse the route of backup file then press finish. The router will automatically restore the
saved configuration.

Backup Configuration: After configuration, suggest using the function to backup your
router parameters in the PC.
Select the Backup Configuration and then press Finish.
Browse the place of backup file named backup. Press Finish. The router will automatically
backup the configuration.

You can upgrade the gateway using the upgrade function.

Browse the file and press OK button to upgrade. The system will reboot

To logout the router, press logout.

For restarting the router, click the Restart in UTILITY.

to reboot the router.

All of the settings will be changed to factory default. On the other hand you will lose all the

Configuration: Sometime the configuration will be crushed unintentionally.

Restore configuration will help you to recover the backup configuration easily.

. The router will automatically restore the

Backup Configuration: After configuration, suggest using the function to backup your

ackup file named backup. Press Finish. The router will automatically

Browse the file and press OK button to upgrade. The system will reboot automatically after

«
...
73
74
75
76
77
...
»

Summary of Contents for MDS921AE-10BTS-R2


















































































































Reviews:

No comments

Related manuals for MDS921AE-10BTS-R2

Brand: Hama Pages: 10

V.92 Desktop Modems MultiModem ZDX

Brand: Multitech Pages: 2

AirCard 550PCS Connection Card

Brand: Sierra Wireless Pages: 184

Brand: Moultrie Mobile Pages: 7

Brand: Elastic Networks Pages: 32

Brand: Archtek telecom Pages: 49

Brand: Enfora Pages: 98

Brand: Telstra Pages: 22

Brand: Embedded Communications Systems Pages: 43

Brand: TRENDnet Pages: 96

Brand: QTech Pages: 10

Brand: Kamstrup Pages: 12

Brand: Paradyne Pages: 17

Brand: Paradyne Pages: 57

Brand: SAMWOO Pages: 27

Skyus 3G Sprint

Brand: Feeney Wireless Pages: 11

Brand: Omni Instruments Pages: 15

Brand: Ebyte Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands