SMARTLINK
I&II
MDS921AE-10BTS - MDS
Move the cursor to service and press enter.
----------------------------------------------------------------------
Command: admin sntp service <Disable|Enable>
Message: Please input the following information.
Active SNTP v4.0 service (Tab Select) <Enable> :
----------------------------------------------------------------------
Move the cursor to time_server1 and press enter.
----------------------------------------------------------------------
Command: admin sntp time_server1 <string>
Message: Please input the following information.
Time server address(Enter for default) <ntp
----------------------------------------------------------------------
You can configure three time server in this system.
Move the cursor to update_rate an
----------------------------------------------------------------------
Command: admin sntp update_rate <10~268435455>
Message: Please input the following information.
Update period (secs) (Enter for default) :
----------------------------------------------------------------------
Move the cursor to time_zone and configure where your router is placed. The easiest way to know
the time zone offset hour is from your PC clock. Double click the clock at the right corner of monitor
and check the time zone.
----------------------------------------------------------------------
Command: admin sntp time_zone <
Message: Please input the following information.
GTM time zone offset (hours) (Enter for default) :
----------------------------------------------------------------------
Move the cursor to list and review the setting.
Utility
There are three utility tools, upgrade, backup and restore, embedded in the firmware. You can
update the new firmware via TFTP upgrade tools and backup the configuration via TFTP backup
tool and restore the configuration via TFTP restore tool. For upgrade, TFTP server with the new
firmware will be supported by supplier but for backup and restore, you must have your own TFTP
server to backup and restore the file.
Move the cursor “
>>
“ to
utility
>> upgrade
Upgrade main software
backup
Backup system configuration
Restore
Restore system configuration
S957AE-10BTS User Manual
Page 98 of 113
Move the cursor to service and press enter.
----------------------------------------------------------------------
Command: admin sntp service <Disable|Enable>
Message: Please input the following information.
Active SNTP v4.0 service (Tab Select) <Enable> :
Enable
----------------------------------------------------------------------
Move the cursor to time_server1 and press enter.
----------------------------------------------------------------------
Command: admin sntp time_server1 <string>
the following information.
Time server address(Enter for default) <ntp-2.vt.edu> :
ntp-2.vt.edu
----------------------------------------------------------------------
You can configure three time server in this system.
Move the cursor to update_rate and press enter.
----------------------------------------------------------------------
Command: admin sntp update_rate <10~268435455>
Message: Please input the following information.
Update period (secs) (Enter for default) :
86400
------------------------------------------------
Move the cursor to time_zone and configure where your router is placed. The easiest way to know
the time zone offset hour is from your PC clock. Double click the clock at the right corner of monitor
----------------------------------------
Command: admin sntp time_zone <-12~12>
Message: Please input the following information.
GTM time zone offset (hours) (Enter for default) :
-8
----------------------------------------------------------------------
Move the cursor to list and review the setting.
There are three utility tools, upgrade, backup and restore, embedded in the firmware. You can
update the new firmware via TFTP upgrade tools and backup the configuration via TFTP backup
ore the configuration via TFTP restore tool. For upgrade, TFTP server with the new
firmware will be supported by supplier but for backup and restore, you must have your own TFTP
server to backup and restore the file.
utility
and press enter.
Upgrade main software
Backup system configuration
Restore system configuration
Move the cursor to time_zone and configure where your router is placed. The easiest way to know
the time zone offset hour is from your PC clock. Double click the clock at the right corner of monitor
There are three utility tools, upgrade, backup and restore, embedded in the firmware. You can
update the new firmware via TFTP upgrade tools and backup the configuration via TFTP backup
ore the configuration via TFTP restore tool. For upgrade, TFTP server with the new
firmware will be supported by supplier but for backup and restore, you must have your own TFTP
