SMARTLINK
I&II
MDS921AE-10BTS - MDS
Type the ISP1 parameters.
Username: test
Password: test
Password Confirm: test
Your ISP will provide the user name and password.
Idle Time: 10
You want your Internet connection to remain on at all time, enter 0 in the Idle Time field.
There are two IP types, Dynamic and Static, which you
It means that ISP PPP server will provide IP information including dynamic IP address when
SHDSL connection is established. On the other hand, you do not need to type the IP address of
WAN1. Some of the ISP will p
IP Type: Fixed
IP Address: 192.168.1.1
Click Next.
Note: For your safety, the password will prompt a
The screen will prompt the parameters that will be written in EPROM. Check the
before writing in EPROM.
Press Restart to restart the router working with new parameters or press continue to setup another
parameter.
S957AE-10BTS User Manual
Page 31 of 113
Your ISP will provide the user name and password.
You want your Internet connection to remain on at all time, enter 0 in the Idle Time field.
There are two IP types, Dynamic and Static, which you can setup. The default IP type is Dynamic.
It means that ISP PPP server will provide IP information including dynamic IP address when
SHDSL connection is established. On the other hand, you do not need to type the IP address of
WAN1. Some of the ISP will provide fixed IP address over PPP. For fixed IP address:
your safety, the password will prompt a star symbol.
The screen will prompt the parameters that will be written in EPROM. Check the
Press Restart to restart the router working with new parameters or press continue to setup another
You want your Internet connection to remain on at all time, enter 0 in the Idle Time field.
can setup. The default IP type is Dynamic.
It means that ISP PPP server will provide IP information including dynamic IP address when
SHDSL connection is established. On the other hand, you do not need to type the IP address of
rovide fixed IP address over PPP. For fixed IP address:
The screen will prompt the parameters that will be written in EPROM. Check the parameters
Press Restart to restart the router working with new parameters or press continue to setup another
