SMARTLINK
I&II
MDS921AE-10BTS - MDS
Type the necessary parameters then click
Press Restart to restart the router or press
Firewall
A firewall is a set of related programs that protects the resources of a private network from other
networks. It is helpful to users that allow preventing hackers
resource accidentally.
This level only enables the NAT firewall and the remote management security. The NAT firewall will
take effect if NAT function is enabled. The remote management security is default to block any
WAN side connection to the device. Non
management connection except those IPs specified in the pool.
Press Finish to finish setting of firewall
The screen will prompt the parameters, which will be written in
S957AE-10BTS User Manual
Page 55 of 113
Type the necessary parameters then click Finish.
to restart the router or press continue to setup another function.
A firewall is a set of related programs that protects the resources of a private network from other
networks. It is helpful to users that allow preventing hackers to access its own private data
This level only enables the NAT firewall and the remote management security. The NAT firewall will
take effect if NAT function is enabled. The remote management security is default to block any
side connection to the device. Non-empty legal IP pool in ADMIN will block all remote
management connection except those IPs specified in the pool.
Press Finish to finish setting of firewall
The screen will prompt the parameters, which will be written in EPROM. Check the parameters.
to setup another function.
A firewall is a set of related programs that protects the resources of a private network from other
to access its own private data
This level only enables the NAT firewall and the remote management security. The NAT firewall will
take effect if NAT function is enabled. The remote management security is default to block any
empty legal IP pool in ADMIN will block all remote
EPROM. Check the parameters.
