SMARTLINK
I&II
MDS921AE-10BTS - MDS
The browser will prompt the
Press Restart to restart the gateway working with the new parameters and press
setup other parameters.
SNMP
Simple Network Management Protocol (SNMP) provides for the exchange of m
network management client and a network management agent for remote management of network
nodes. These messages contain requests to get and set variables that exist in network nodes in
order to obtain statistics, set configuration paramet
communications can occur over the LAN or WAN connection.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. This router support MIB I a
Click SNMP to configure the parameters.
In the table of current community pool, you can setup the access authority.
In the table of current trap host pool, you can setup the trap host.
Press Modify to modify the community pool.
SNMP status: Enable
S957AE-10BTS User Manual
Page 70 of 113
The browser will prompt the configured parameters and check it before writing into EPROM.
to restart the gateway working with the new parameters and press
Simple Network Management Protocol (SNMP) provides for the exchange of m
network management client and a network management agent for remote management of network
nodes. These messages contain requests to get and set variables that exist in network nodes in
order to obtain statistics, set configuration parameters, and monitor network events. SNMP
communications can occur over the LAN or WAN connection.
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
community strings to implement SNMP security. This router support MIB I and MIB II.
to configure the parameters.
In the table of current community pool, you can setup the access authority.
In the table of current trap host pool, you can setup the trap host.
to modify the community pool.
configured parameters and check it before writing into EPROM.
to restart the gateway working with the new parameters and press Continue to
Simple Network Management Protocol (SNMP) provides for the exchange of messages between a
network management client and a network management agent for remote management of network
nodes. These messages contain requests to get and set variables that exist in network nodes in
ers, and monitor network events. SNMP
The router can generate SNMP traps to indicate alarm conditions, and it relies on SNMP
nd MIB II.
