SMARTLINK
I&II
MDS921AE-10BTS - MDS
To modify fixed IP address mapping, move the cursor “
>> modify
Modify fixed NAT mapping
interface
Bind address pair to specific interface
delete
Delete fixed NAT mapping
list
Show fixed IP address mapping
You can create up to 10 fixed NAT mapping entry via
----------------------------------------------------------------------
Command: setup ip_share nat fixed modify <1~1o> <
Message: Please input the following information.
Fixed NAT mapping entry number <1~10>:
Local address:
192.168.0.250
Global address:
122.22.22.2
----------------------------------------------------------------------
After configuration fixed IP address entry, you can bind the entry to specific interface via
command.
----------------------------------------------------------------------
Command: setup ip_share nat fixed interface <1~5> <1~8>
Message: Please input the following
Fixed NAT mapping entry number <1~5>:
Active interface number (Enter for default) <1~8>:
----------------------------------------------------------------------
You can delete fixed NAT mapping entry
You can view the fixed NAT mapping entry via
PAT
To configure Port Address Translation, move the cursor “
>> clear
Clear virtual server mapping
modify
Modify virtual server mapping
list
Show virtual
You can delete virtual server mapping entry
You can create up to 10 virtual server mapping entry via
----------------------------------------------------------------------
Command: setup ip_share pat modify <1~10>
Message: Please input the following information.
Virtual server entry number <1~10>:
----------------------------------------------------------------------
After key in enter, the screen will prompt as below.
>> interface
Active interface
S957AE-10BTS User Manual
Page 108 of 113
To modify fixed IP address mapping, move the cursor “
>>
” to
fixed
command and press enter.
Modify fixed NAT mapping
Bind address pair to specific interface
Delete fixed NAT mapping
Show fixed IP address mapping
You can create up to 10 fixed NAT mapping entry via
range
command.
----------------------------------------------------------------------
Command: setup ip_share nat fixed modify <1~1o> <ip> <ip>
Message: Please input the following information.
Fixed NAT mapping entry number <1~10>:
1
192.168.0.250
122.22.22.2
----------------------------------------------------------------------
P address entry, you can bind the entry to specific interface via
----------------------------------------------------------------------
Command: setup ip_share nat fixed interface <1~5> <1~8>
Message: Please input the following information.
Fixed NAT mapping entry number <1~5>:
1
Active interface number (Enter for default) <1~8>:
1
----------------------------------------------------------------------
You can delete fixed NAT mapping entry- from 1 to 5- by using
delete
command
You can view the fixed NAT mapping entry via
list
command.
To configure Port Address Translation, move the cursor “
>>
” to
pat
and press enter.
Clear virtual server mapping
Modify virtual server mapping
Show virtual server mapping pool
You can delete virtual server mapping entry- from 1 to 10- by using
clear
command.
You can create up to 10 virtual server mapping entry via
modify
command.
----------------------------------------------------------------------
Command: setup ip_share pat modify <1~10>
Message: Please input the following information.
Virtual server entry number <1~10>:
1
----------------------------------------------------------------------
After key in enter, the screen will prompt as below.
Active interface
command and press enter.
P address entry, you can bind the entry to specific interface via
interface
command.
and press enter.
command.
