SMARTLINK
I&II
MDS921AE-10BTS - MDS
Window structure
From top to bottom, the window will be divided into four parts:
1.
Product name
2.
Menu field: Menu tree is prompted on this field. “
3.
Configuring field: You will configure the parameters in this field.
parameters you can choose and
4.
Operation command for help
The following table shows the parameters in
Command
<ip>
An item enclosed in brackets is required. If the item is shown in lower
case bold, it represents an object with special format. For example,
<ip>
<Route|Bridge>
Two or more items enclosed in
bars means that you must choose exactly one of the items. If the item
is shown in lower case bold with leading capital letter, it is a command
parameter. For example,
<Route|Bridge>
[1~1999]
An item enclosed in brackets is optional.
[1~65534|-t]
Two or more items enclosed in brackets and separated by vertical
bars means that you can choose one or none of the items.
Menu Driven Interface Commands
Before changing the configuration,
The operation list will be shown on the window.
Keystroke
[UP] or I
Move to above field in the same level menu.
[DOWN] or K
Move to below
[LEFT] or J
Move back to previous menu.
[RIGHT] or L
Move forward to submenu.
[ENTER]
Move forward to submenu.
[TAB]
To choose another parameters.
Ctrl + C
To quit the configuring item.
Ctrl + Q
For help
Menu Tree
The menu three are as following figures. All of the configuration commands are placed in the
subdirectories of Enable protected by supervisor password. On the other hand, unauthorized user
cannot change any configurations but viewing the status and configurati
ping command to make sure the router is worked.
Note: Some commands could be present or not depending of firmware and hardware release.
S957AE-10BTS User Manual
Page 87 of 113
Window structure
From top to bottom, the window will be divided into four parts:
Menu field: Menu tree is prompted on this field. “
>>
” symbol indicates the cursor place.
Configuring field: You will configure the parameters in this field.
< parameters >
parameters you can choose and
< more…>
indicates that there have submenu in the title.
Operation command for help
The following table shows the parameters in the brackets.
Description
An item enclosed in brackets is required. If the item is shown in lower
case bold, it represents an object with special format. For example,
<ip>
may be
192.168.0.3
.
Two or more items enclosed in brackets and separated by vertical
bars means that you must choose exactly one of the items. If the item
is shown in lower case bold with leading capital letter, it is a command
parameter. For example,
Route
is a command parameter in
<Route|Bridge>
.
An item enclosed in brackets is optional.
Two or more items enclosed in brackets and separated by vertical
bars means that you can choose one or none of the items.
Menu Driven Interface Commands
Before changing the configuration, familiarize yourself with the operations list in the following table.
The operation list will be shown on the window.
Menu Driven Interface Commands
Description
Move to above field in the same level menu.
Move to below field in the same level menu.
Move back to previous menu.
Move forward to submenu.
Move forward to submenu.
To choose another parameters.
To quit the configuring item.
menu three are as following figures. All of the configuration commands are placed in the
subdirectories of Enable protected by supervisor password. On the other hand, unauthorized user
cannot change any configurations but viewing the status and configuration of the router and using
ping command to make sure the router is worked.
Note: Some commands could be present or not depending of firmware and hardware release.
” symbol indicates the cursor place.
< parameters >
indicates the
indicates that there have submenu in the title.
An item enclosed in brackets is required. If the item is shown in lower
case bold, it represents an object with special format. For example,
brackets and separated by vertical
bars means that you must choose exactly one of the items. If the item
is shown in lower case bold with leading capital letter, it is a command
is a command parameter in
Two or more items enclosed in brackets and separated by vertical
bars means that you can choose one or none of the items.
familiarize yourself with the operations list in the following table.
menu three are as following figures. All of the configuration commands are placed in the
subdirectories of Enable protected by supervisor password. On the other hand, unauthorized user
on of the router and using
Note: Some commands could be present or not depending of firmware and hardware release.
