SMARTLINK
I&II
MDS921AE-10BTS - MDS
IPoA or EoA
Before your configure the router, check
VPI:
VCI:
Encapsulation:
IP Address:
Subnet Mask:
Gateway:
DNS Server:
Host Name: (if applicable
Type the Wan Parameters;
VPI: 0
VCI: 33
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA +
Click Next to setup the IP parameters.
For more understanding about NAT, review NAT/DMZ.
IP Address: 10.1.2.1
It is router IP address seem from Internet. Your ISP will provide it and you need to specify here.
Subnet mask: 255.255.255.0
This is the router subnet mask seen by external users on Internet. Your ISP will provide it to you.
Gateway: 10.1.2.2
Your ISP will provide you the
DNS Server 1: 168.95.1.1
Your ISP will provide at least one DNS (Domain Name System) Server IP address.
Click Next
S957AE-10BTS User Manual
Page 32 of 113
the router, check the information below with your ISP.
licable)
+ NAT or EoA + NAT
to setup the IP parameters.
For more understanding about NAT, review NAT/DMZ.
ress seem from Internet. Your ISP will provide it and you need to specify here.
255.255.255.0
This is the router subnet mask seen by external users on Internet. Your ISP will provide it to you.
Your ISP will provide you the default gateway.
Your ISP will provide at least one DNS (Domain Name System) Server IP address.
ress seem from Internet. Your ISP will provide it and you need to specify here.
This is the router subnet mask seen by external users on Internet. Your ISP will provide it to you.
Your ISP will provide at least one DNS (Domain Name System) Server IP address.
