SMARTLINK
I&II
MDS921AE-10BTS - MDS
Show
You can view the system information, configuration and configuration in command script by
command.
Move cursor “
>>
“ to
show
and press enter.
>> system
Show general
config
Show all configuration
script
Show all configuration in command script
Command
system
The general information of the system will show in system command.
config
Config command can display detail configuration
script
Configuration information will prompt in command script.
Write
For any changes of configuration, you must write the new configuration to EPROM using
command and reboot the router to take affect.
Move cursor to “
>>
“ to
write
----------------------------------------------------------------------
Command: write <CR>
Message: Please input the following information.
Are you sure? (y/n):
y
----------------------------------------------------------------------
Reboot
To reboot the router, use
reboot
----------------------------------------------------------------------
Command: reboot <CR>
Message: Please input the following information.
Do you want to reboot? (y/n):
----------------------------------------------------------------------
Ping
Ping command will be used to test the connection of router. Move cursor “
enter.
----------------------------------------------------------------------
Command: ping <ip> [1~65534|
Message: Please input the following information.
IP address <IP> :
10.0.0.1
Number of ping request packets to send (TAB select):
Data size [1~1999]:
32
----------------------------------------------------------------------
There are 3 types of number of ping request packet to send, default, 1~65534 and
send 4 packet and –t continuous packet until you key in Ctrl+c to stop.
S957AE-10BTS User Manual
Page 94 of 113
You can view the system information, configuration and configuration in command script by
and press enter.
Show general information
Show all configuration
Show all configuration in command script
Description
The general information of the system will show in system command.
Config command can display detail configuration information.
Configuration information will prompt in command script.
For any changes of configuration, you must write the new configuration to EPROM using
command and reboot the router to take affect.
write
and press enter.
----------------------------------------------------------------------
Message: Please input the following information.
----------------------------------------------------------------------
reboot
command. Move cursor to “
>>
“ to
write
and press enter.
----------------------------------------------------------------------
Message: Please input the following information.
eboot? (y/n):
y
----------------------------------------------------------------------
Ping command will be used to test the connection of router. Move cursor “
>>
----------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
Number of ping request packets to send (TAB select):
-t
----------------------------------------------------------------------
There are 3 types of number of ping request packet to send, default, 1~65534 and
t continuous packet until you key in Ctrl+c to stop.
You can view the system information, configuration and configuration in command script by
show
The general information of the system will show in system command.
information.
For any changes of configuration, you must write the new configuration to EPROM using
write
and press enter.
>>
“ to
ping
and press
There are 3 types of number of ping request packet to send, default, 1~65534 and –t. Default will
