Biocare PM-900, User Manual

Page: 179 / 182

Appendix E EMC- Guidance and Manufacture‘s Declaration
User Manual of Veterinary Monitor --167--
E.3 Guidance and manufacture
’s declaration-electromagnetic immunity
for EQUIPMENT and SYSTEMS those are not LIFE-SUPPORTING
Guidance and manufacturer´s declaration – electromagnetic immunity
The Veterinary Monitor is intended for use in the electromagnetic environment specified below. The
customer or the user of the Veterinary Monitor should assure that it is used in such an environment.
Immunity test IEC 60601
test level
Compliance
level
Electromagnetic environment - guidance
Conducted RF
EN 61000-4-6
Radiated RF
EN 61000-4-3
3 Vrms
150 kHz to 80
MHz
3 V/m
80 MHz to
2.5 GHz
3 V
3 V/m
Portable and mobile RF communications equipment should
be used no closer to any part of the A100C Animal
Doppler, including cables, than the recommended
separation distance calculated from the equation applicable
to the frequency of the transmitter.
Recommended separation distance
P
V
d ]
5 . 3
[
1

P
E
d ]
5 . 3
[
1

80 MHz to 800 MHz
P
E
d ]
7
[
1

800 MHz to 2.5 GHz
where p is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and d is the recommended separation distance
in metres (m).b
Field strengths from fixed RF transmitters, as determined by
an electromagnetic site survey,a should be less than the
compliance level in each frequency range.b
Interference may occur in the vicinity of equipment marked
with the following symbol:
ATTENTION 1 At 80 MHz and 800 MHz, the higher frequency range applies.
ATTENTION 2 These guidelines may not apply in all situations. Electromagnetic is affected by absorption
and reflection from structures, objects and people.