Biocare PM-900 User Manual Download Page 128

Page: 128 / 182

Chapter 11 Other Functions

--116--

User Manual of Veterinary Monitor

11.4 Defaults

Figure 11.2 Resume Default Setup

Refer to Chapter 3.10.5.

11.5 System State Indicator

Including AC / DC power supply indicator (there are indicator lights on the shell), battery voltage indicator (there

are charging indicator lights on the shell), date and time indicator, central site online state indicator, animals‘

information indicator and demonstrating mode indicator.

11.6 Standby Mode

Select [System] - [Screen Setup] - [Screen Config] - [Shortcut Key >>] and open shortcut key setup menu, change

the [Standby] option to shortcut key, return to main screen and press [Standby] shortcut key, select [OK] in the

indicating information interface that has popped up, then you can shift into standby mode. In the standby mode,

push any button and you can end standby mode.

Select ‗standby‘ option in [Animal Manage] - [Discharge Animal] menu, you can also enter standby mode after

the monitor executes discharge animals/ clear animal data.

Summary of Contents for PM-900























































































































































































Search results

Summary of Contents for PM-900

Reviews:

Biocare PM-900, User Manual, Page: 128 / 182

Search results

Summary of Contents for PM-900

Reviews: