Biocare PM-900 User Manual Download Page 123

Page: 123 / 182

Chapter 10 Recording (Optional)

User Manual of Veterinary Monitor --111--

Chapter 10 Recording (Optional)

10.1 Recorder

This series of monitors use a thermal array recorder, supports multiple recording types, including real-time

recording, parameter crossed or alarm recording triggered by arrhythmia etc., and certain function-related

recording.

Figure10.1 Recorder



Recording

Push this button and you can start or stop recording.



Lever Switch

In accordance with the direction of the arrow press down, and you can open the recorder door.



Indicating Light



On: recording apparatus is in the normal functioning state.



Off: recorder off.



Flashing: recorder failure, i.e.: no paper.

10.2 Record Setup

Select [Main Menu]- [Record Setup], as figure10.2 shows:

Figure 10.2 Record Setup

Summary of Contents for PM-900























































































































































































Search results

Summary of Contents for PM-900

Reviews:

Biocare PM-900, User Manual, Page: 123 / 182

Search results

Summary of Contents for PM-900

Reviews: