Biocare PM-900 Page 16 User Manual Download

Page: 16 / 182

Customer Required Reading

--4--

User Manual of Veterinary Monitor

index tests prove this series of monitors is still operational, it can go on to being used.

When blood pressure is measured, the manual mode is recommended by the manufacturer. If the

automated or continuous model is selected, a qualified observer should be present.

For animals with pacemakers, heart rate meter may be in asystole or arrhythmia the pacemaker

pulse count. Do not rely solely on heart rate alarm. Should be closely monitoring animals with

pacemaker.

Do not modify this series of equipments without authorization of the manufacturer. If this series of

equipments are modified, appropriate inspection and testing must be conducted to ensure

continued safe use of the equipment.

Please read clinical limitations and contraindication information carefully.

Summary of Contents for PM-900























































































































































































Search results

Summary of Contents for PM-900

Reviews:

Related manuals for PM-900

Brands by name

Popular brands

Biocare PM-900, User Manual

Search results

Summary of Contents for PM-900

Reviews:

Related manuals for PM-900

Brands by name

Popular brands