Biocare PM-900, User Manual

Page: 74 / 182

Chapter 6 Parameter Monitoring
--62-- User Manual of Veterinary Monitor
2. Clip the probe to the tongue or ears of the tested animals, by referring to Figure 6.15.
Figure 6.13 Diagram on Pulse Oximetry Probe and Tougue Positions
Attention

Don
’t fold or twist the cables.
6.4.4 SpO
2
Setup
Open the [SpO
2
Setup] menu by:

Select [Main Menu]-[Parameters], and select [SpO
2
Setup].

Select SpO
2
parameter region to enter [SpO
2
Setup].
Figure 6.14 SpO
2
Setup

NIBP Simul Setup
Select [NIBP Simul]: On/Off.
It should be set [On] when NIBP and SpO
2
measures are conducted on the same limb of the animal until the
NIBP measure is completed so as to maintain SpO
2
physiological alarm state constant while doing NIBP
measure. If it is set [Off], the weak perfusion caused by NIBP measure may lead to reduced SpO
2
measuring
accuracy and trigger SpO
2
alarm while the NIBP measure is in process.

Sweep Setup
Select [Sweep]: 12.5 mm/s and 25.0 mm/s. Set pleth waveform scanning speed, and a larger value will result
in higher scanning speed and wider waveforms.