Biocare PM-900, User Manual, Page: 134 / 182

Chapter 13 Cleaning and Maintenance
--122-- User Manual of Veterinary Monitor
13.3 Fan Cleaning
To ensure smooth air flow and good ventilation, the fan should be cleaned if there is visible dust or other particles
on the inlet or outlet.
Attention

The cleaning interval should be shortened if the equipment is used in a region or an environment
with heavy dust.
13.4 Storage of Monitor
If the monitor will be out of use for a long time, wipe it clean and put it in a packing box for indoor storage at a
place that is dry, well ventilated and free from dust or corrosive gas.
13.5 Transport
The monitor may be transported by car, train or plane as agreed in the Contract. Do not throw or knock during
transport.
13.6 Inspection of Monitor
Before use or after use for half a year, the monitor should be thoroughly checked by a qualified technician to
ensure that the equipment is working normally. If you find that the monitor is slightly damaged during use or its
functional display is incomplete or abnormal, do not use the monitor on an animal.
Table 13.1 Maintenance Period
Maintenance items Maintenance period (years)
Check according to IEC 60601-1 2
NIBP calibration 2
NIBP accuracy test 2
NIBP leakage test 2
CO
2
calibration and performance testing 1
Note:
You should check the device at least as the period that the above table lists and also the follow
items:
1. The measured data isn‘t correct.
2. The target hospital has the requirements of device inspection.
3. After change the current source or the device drop.