Biocare PM-900 Page 121 User Manual Download

Page: 121 / 182

Chapter 9 Calculations

User Manual of Veterinary Monitor --109--

Select

to view results of forward or backward page.

Select

to view the first or the last result.

Select

to scroll up or scroll down to view more parameter values.

9.3.2 Output

You can enter the Output interface by selecting [View outputs] or [Calculate] to view calculated outputs of the

current input parameters. If by [View outputs], the outputs will not be saved, and you can only browse the output

value. If by [Calculate], the current calculation results will be saved and can be viewed in Review interface.

Figure 9.5 Output interface

Values which are beyond the normal range will be displayed on a yellow background. Please re-enter the

reasonable value.

Select [Range], display the reasonable scope of the output values.

Select [Unit], display the unit of the output values.

Select [Review], enter Review interface.

Select [View inputs], enter Input interface.

Select [Record], print the current calculation. The printing content includes name, Gender, No., Bed No., Height,

Weight, Birthday, Record Time and Hospital.

Summary of Contents for PM-900























































































































































































Search results

Summary of Contents for PM-900

Reviews:

Related manuals for PM-900

Brands by name

Popular brands

Biocare PM-900, User Manual

Search results

Summary of Contents for PM-900

Reviews:

Related manuals for PM-900

Brands by name

Popular brands