BIO RAD CFX384, Instruction Manual

Page: 91 / 158

Data Analysis Windows
82
• Spreadsheet. Shows a spreadsheet of the data collected in the selected wells
Figure 80. Layout for the Quantitation tab in Data Analysis window.
Fluorophore Selector
To select the fluorophore data to display in the Quantitation tab charts and spreadsheets, click
the fluorophore selector below the Amplification chart (Figure 81). Click the box next to the
fluorophore name to show or hide the fluorophore data throughout the data analysis window.
Figure 81. Fluorophore selector with FAM selected.
Trace Styles Window
Open the Trace Styles window (Figure 82) to adjust the appearance of traces in the
amplification and melt curve charts in the Quantitation and Melt Curve tabs.
To open this window, follow these steps:
1. Select only one fluorophore in the fluorophore selection boxes (Figure 81) under the
Amplification chart.
2. Click the Trace Styles button in the Data Analysis toolbar, or select Settings > Trace
Styles in the Data Analysis menu bar.