BIO RAD CFX384 Instruction Manual Download Page 19

Page: 19 / 158

System Installation

Figure 11. Plate Editor window showing plate orientation.

WARNING!

When running the CFX96 system, always balance the tube strips or cut

microplates in the wells (Figure 12). For example, if you run one tube strip on the
left side of the block, run an empty tube strip (with caps) on the right side of the
block to balance the pressure applied by the heated lid.

Figure 12. Balance the tube strips or cut microplates in the block.

WARNING!

Be sure that nothing is blocking the lid when it closes. Although there

is a safety mechanism to prevent the lid from closing if it senses an obstruction, do
not place anything in the way of the closing lid.

Well H3

Well A10
(180

rotation)

(correct)

Filled tube
strip

Tube strip for
balance

Summary of Contents for CFX384































































































































































Search results

Summary of Contents for CFX384

Reviews:

Brands by name

Popular brands

BIO RAD CFX384, Instruction Manual

Search results

Summary of Contents for CFX384

Reviews:

Brands by name

Popular brands