manualshive.com logo in svg

BIO RAD CFX384, Instruction Manual

Share
Download
BIO RAD CFX384 Instruction Manual Download Page 148

CFX96 and CFX384 Systems Manual

139

*To prevent data loss, use a sufficiently shielded USB cable (catalog #184-8000) when 
connecting instruments to the computer or to another instrument.

References

Breslauer KJ, et al. Predicting DNA duplex stability from the base sequence, Proc Nat 
Acad Sci 83, 3746–50 (1986)

Livak JL, et al. Towards fully automated genome-wide polymorphism screening, Nature 
Genetics 9, 341–342 (1995)

Pfaffl MW. A new mathematical model for relative quantification in real-time RT-PCR, 
Nucleic Acids Research 29(9), 2002–2007 (2001)

Vandesompele J, et al. Accurate normalization of real-time quantitative RT-PCR data by 
geometric averaging of multiple internal control genes, Genome Biology 3(7), 1–12 (2002)

Minpack Copyright Notice (1999) University of Chicago. All rights reserved

Redistribution and use in source and binary forms, with or without modification, are permitted 
provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of 

conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of 

conditions and the following disclaimer in the documentation and/or other materials 
provided with the distribution.

3. The end-user documentation included with the redistribution, if any, must include the 

following acknowledgment:

“This product includes software developed by the University of Chicago, as Operator of 
Argonne National Laboratory.

170-8860

iQ

Tm

 Supermix, 100 reactions

170-8880

iQ

Tm

 SYBR® Green Supermix, 100 reactions

Table 45. 1000-series instruments, reaction modules, and accessories.

Catalog Number

Description

Summary of Contents for CFX384































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands