BIO RAD CFX384 Instruction Manual Download Page 33

Page: 33 / 158

Running Experiments

•

Edit Selected button.

Open the currently selected plate in the Plate Editor

Figure 26. Plate tab window.

Start Run Tab

The Start Run tab (Figure 27) includes a section for checking information about the run that is
going to be started, including the selected protocol and plate files, and a section for selecting
the instrument block.

•

Run Information pane.

View the selected Protocol file, Plate file, and data acquisition

Scan Mode setting. Enter optional notes about the experiment in the

Notes

box

•

Start Run on Selected Block(s) pane.

Select one or more blocks, edit run parameters

(if necessary), and then click the

Start Run

button to begin the experiment

Figure 27. The Start Run tab.

Summary of Contents for CFX384































































































































































Search results

Summary of Contents for CFX384

Reviews:

Brands by name

Popular brands

BIO RAD CFX384, Instruction Manual

Search results

Summary of Contents for CFX384

Reviews:

Brands by name

Popular brands