Field
Description
LAN. A scan of the 5.8 GHz frequency range is performed.
•
8$%4 92 9!7 *
: Only for devices with a WLAN
controller. A Neighbor Scan is initiated by the WLAN network
controlled by the WLAN controller.
•
8$%4 E
: Only for devices with a WLAN controller.
The status of a wireless network is modified.
•
8$,94 : .
: The operating mode of a WLAN
radio module is modified.
Event List
Select the event list you want which has been created in Local
Services->Scheduling->Trigger.
Event List Condition
For the selected chains of events, select how many of the con-
figured events must occur for the operation to be initiated.
Possible values:
•
,++
(default value): The operation is initiated if all events oc-
cur.
•
:
: The operation is initiated if a single event occurs.
•
9
: The operation is triggered if no event occurs.
•
:
: The operation is triggered if one of the events does
not occur.
Reboot device after
Only if Command Type =
?7
Enter the timespan in seconds that must elapse after occur-
rence of the event until the device is restarted.
The default value is
seconds.
MIB/SNMP Variable to
add/edit
Only if Command Type =
.&59.
Select the MIB table in which the MIB variable whose value
shall be changed is saved. First, select the System, then the
MIB Table. Only the MIB tables present in the respective area
are displayed.
Command Mode
Only if Command Type =
.&59.
Select how the MIB entry is to be manipulated.
Possible settings:
17 Local Services
bintec elmeg GmbH
362
be.IP 4isdn
